RePallet Co.Denver · Circular by design
Get a quote

Materials & making

Nails: the quiet economics of the steel in every pallet

Request pricing

Everything marked with a star is required. The rest helps us quote faster.

Free to request
A working address, so a partner supplier can send your quote.
US or Canadian number.
Two-letter code such as CO, or the full name.
US ZIP or Canadian postal code.
Whole numbers only.
No phone tag — requests go to partner suppliers in our network. Fields marked * are required. See our privacy policy.

Nobody buys a pallet for its nails. Everybody who repairs pallets ends up thinking about them more than they expected.

A standard 48" x 40" GMA stringer pallet contains dozens of nails. Multiply that by the volume a busy recycling yard handles and it adds up to a lot of steel arriving embedded in wood.

The fastener decides the pallet's life

This is the part most buyers never consider, and it can have a larger effect on service life than species, grade or board thickness.

Fastener types and their consequences over a pallet's life.
FastenerWithdrawal resistanceShiner rateRepairabilityTypical use
Smooth-shank nailLowHighPoor — holes elongateCheap one-way pallets
Ring-shank (annular)HighVery lowGoodThe industry standard
Screw-shank (helical)Very highNegligibleGoodHeavy-duty and block pallets
StaplesModerateModeratePoorLight-duty, display
BoltsHighestNoneExcellentSpecialist pallets

A pallet built with smooth-shank nails will produce shiners for the rest of its life. Every thermal cycle, every load, every fork impact works the fastener a fraction further out. Many repairers keep those out of repair stock because the labour never ends — you shear the shiners, ship it, and it comes back with new ones.

If you ever specify how your pallets are built, ring-shank is the cheapest durability upgrade available. It adds very little per fastener and can substantially extend the useful repair life of the unit.

Getting the steel back out

On a typical dismantling line, a band saw separates deck boards from stringers with the nails still in the wood. That is deliberate — cutting through the nail line is faster and does less damage to the board than prying it off.

  1. 1

    Band-saw separation

    Decks come off stringers. Nails stay in the boards.

  2. 2

    De-nailing

    Boards destined for resale are de-nailed by hand and by pneumatic puller.

  3. 3

    Metal detection

    Boards sold as lumber should pass a detector. One missed nail destroys a planer blade.

Why most of the steel never leaves

Only a fraction of that steel is ever recovered as scrap, because most of it never needs to leave — it stays in boards that go straight back into repairs with the fasteners in place. That is a feature. Pulling a nail out of a sound board to sell for scrap and then driving a new nail back in would be a remarkably wasteful way to run a yard.

Why contamination matters

Wood with ferrous contamination is hard to reuse or recycle, and a hazard to anyone handling it. Staples, banding, strapping seals and the occasional forgotten screwdriver all end up in the same stream, and a detector does not care which one ruined the batch. That is why recyclers are strict about what they accept.

One thing you can do

If you are returning pallets to any recycler, pull the banding and the strapping seals off first. It takes seconds per pallet, it is one of the most common contaminants, and it is a common reason a load gets downgraded for handling.

#fasteners#recycling#scrap

RePallet Co. Editorial

Editorial team

These guides are written by the team behind RePallet Co., a referral service that connects businesses across Denver and the Colorado Front Range with partner pallet suppliers in its network. We do not run a yard ourselves; we pass quote requests to partners who do, and we write up what buyers and sellers of pallets generally need to know.

Let's keep your pallets in the loop

Whether you have 40 broken cores behind the dock or need 4,000 Grade A pallets a month, the conversation starts the same way.