RePallet Co.Denver · Circular by design
Get a quote

Logistics

Pinwheeling: more pallet positions in the same trailer

Request pricing

Everything marked with a star is required. The rest helps us quote faster.

Free to request
A working address, so a partner supplier can send your quote.
US or Canadian number.
Two-letter code such as CO, or the full name.
US ZIP or Canadian postal code.
Whole numbers only.
No phone tag — requests go to partner suppliers in our network. Fields marked * are required. See our privacy policy.

A 53' trailer straight-loaded with 48" x 40" pallets holds twenty-six floor positions. Pinwheeled, the same trailer holds thirty. Nobody had to invent anything.

The arithmetic is simple. A 53' trailer has roughly 630" of usable length and 98" of usable width. Load pallets straight — two abreast, 48" deep — and you get 13 rows of 2, or 26 positions, using 624" of length and 80" of width. You are wasting 18" of width down the entire trailer.

How pinwheeling works

Alternate rows are rotated. One row runs two pallets at 40" wide and 48" deep; the next runs pallets turned 90°, at 48" wide and 40" deep, with a third pallet tucked into the width that was being wasted. The pattern repeats down the trailer.

53' van, 48x40 pallets, single-stacked.
PatternPositionsWidth usedLength usedNotes
Straight, 2 abreast2680"624"Simplest; 18" wasted width
Turned, 2 abreast2696"520"Wastes length instead
Pinwheel3096"+630"More positions
Pinwheel, 48' van2696"+570"Gains over straight loading

When it works

  • Uniform pallet size. Mixed footprints defeat the geometry entirely.
  • Loads that do not overhang. Even an inch of overhang destroys the tolerances.
  • Stable, banded or wrapped loads. Pinwheeled rows brace each other, but only if each unit holds together.
  • Forklift loading from a dock. It is difficult to pinwheel from the side with a moffett.
  • Weight below the axle limit. Four extra positions is four extra pallets of weight; check before you celebrate.

When it does not

Pinwheeling gets a bad reputation from operations that tried it with the wrong freight. The honest list of failure cases:

  • Tall, top-heavy loads. The interlocking pattern helps laterally and does nothing for a load that wants to topple forward.
  • Anything that gets unloaded in a fixed sequence. Pinwheeled trailers come out in a pattern, and a receiving bay expecting LIFO order will be unhappy.
  • Automated unloading systems. Almost all of them assume straight loading.
  • Mixed-height loads. Height variation removes the bracing effect between rows.
  • Drivers who have not done it before. The first pinwheeled trailer takes noticeably longer. After a few it is routine.
Restraint still applies. Pinwheeling braces a load; it does not restrain it. Load bars or straps every third row, same as always. A trailer that stops hard does not care how cleverly it was loaded.

What it is worth

On empty pallet freight the benefit is direct: fewer trailers for the same number of pallets, and a corresponding cut in diesel burned.

It is not clever and it is not new. It is just free. If you are arranging empty-pallet freight through a partner supplier, it is worth asking whether they pinwheel by default.

#loading#freight#efficiency

RePallet Co. Editorial

Editorial team

These guides are written by the team behind RePallet Co., a referral service that connects businesses across Denver and the Colorado Front Range with partner pallet suppliers in its network. We do not run a yard ourselves; we pass quote requests to partners who do, and we write up what buyers and sellers of pallets generally need to know.

Let's keep your pallets in the loop

Whether you have 40 broken cores behind the dock or need 4,000 Grade A pallets a month, the conversation starts the same way.