Field notes
How pallet grading works: a walk down a sort line
Request pricing
Everything marked with a star is required. The rest helps us quote faster.
Visitors to a recycling yard always want to see the grinder. The grinder is the least interesting machine there. The interesting thing is a person with a hook standing at the end of a conveyor.
A pallet yard's economics are decided in a few seconds per unit at the sort line. Route a repairable pallet to the grinder and you have destroyed value. Route a cracked stringer to the repair line and you have wasted labour and produced a pallet somebody might rack.
A typical line, in order
- 1
Gate and scale
Trailer weighed, load photographed, a reference opened. Everything downstream ties to that record.
- 2
Unload and stage
Stacks broken down onto the infeed. Pooled pallets pulled out here, not later.
- 3
Thaw or dry, if required
Through the winter, and after any wet load. Grading wet wood is grading blind.
- 4
Sort line
The few-second decision. One grader, one hook, several outfeed lanes.
- 5
Route
Reuse, repair, remanufacture, dismantle. Four physical destinations.
- 6
Verify
A second grader spot-checks a sample of the reuse lane. This is how a yard knows its accuracy.
The four-question decision
It is four questions, asked in a fixed order because the order minimises the number that need asking.
- Is it sound? Look down both stringers. A crack anywhere structural ends the inspection — it goes to dismantle.
- Is it clean? Mould, chemical staining, oil, char. Rejection, isolated, not into any stream.
- Is it complete? Missing boards and shiners. A missing board goes to repair; shiners alone can stay in the reuse lane with a quick shear.
- Is it original? Companion stringers and plugs. Present usually means Grade B; absent, with only a couple of replaced boards, usually means Grade A.
Most pallets are answered by questions one and four. The whole thing is a decision tree that fits in somebody's hands. Exact thresholds differ between suppliers, which is why a written grade standard matters.
How a yard knows it is working
A well-run yard measures its grading the same way it measures anything else: by spot-checking a sample of graded units and tracking the error rate. The measures worth asking a supplier about:
- How often Grade A units are correctly graded
- How often Grade B units are correctly graded
- How often repairable units are wrongly sent to dismantle
- How often unsound units are wrongly sent to reuse — as close to zero as possible
- How many grade disputes arise, and whether each one is investigated
The measure that matters most is the fourth. An unsound unit reaching the reuse lane is the one error that can end up on a rack beam, and a careful yard investigates every one — which pallet, which grader, what time of shift.
Why most grading is still done by people
Vision systems are genuinely good at the things that are easy — missing boards, gross geometry, obvious damage. They have historically been weaker at the things that decide value: distinguishing a check from a crack, recognising a companion stringer under weathering, and noticing mould early.
A system that gets most decisions right at much higher speed sounds attractive until you price the errors. That balance is shifting as the technology improves, but for now a trained grader remains the norm in most yards.
Why it matters to you
Whether you are selling cores or buying graded stock, the sort line is where your money is decided. Ask the partner supplier who quotes you for their written grade standard, and ask how they check their grading. A confident, specific answer is a good sign.